Wi-Fi Mesh Router
ATOP AWR is an advanced device that allows a very tangible scale-up of almost any industrial wireless infrastructure. In addition to high EMC protection, wide-temperature operation, superb hardware and advanced features, AWR will provide high-speed internet access with load balancing and high degrees of security, high speeds and advanced configuration options.
Quad-ARM Cortex A7 CPU: AWR integrates an industrial-grade Quadcore A7 ARM CPU, enabling the processing power you need to filter heavy traffic over firewalls, routing, forwarding and security meansures.
Wi-Fi Mesh: AWR’s advanced chipset allows you to set up several devices as a mesh network, achieving a self-healing network that adjusts its topology based on need--perfect for dynamic applications.
High-Performance: With its integrated IEEE802.11ac wave-2 feature and supporting 2x2 concurrent MUMIMO RF, AWR provides high-throughput connections through 2.4 GHz and 5.0 GHz bands.
Security: Integrating firewall, zone forwarding, and VPN features, ATOP AWR allows you to connect your industrial network to the internet without fearing intrusions into your organization data.
Harsh Environments: ATOP AWR is proven to run at its maximum loading in the harshest EMC and climate environments.
Reliability: With a rugged metal housing and power redundancy, AWR is resistive to damage in harsh industrial environments.
As a Wi-Fi DBDC Router
AWR5805’s simplest operating mode is as a router/access point. Use it to connect to the internet through your broadband provider via PPPoE, Static IP or DHCP and provide internet connection to Wi-Fi and wired clients. With AWR you can define your own wireless access policy and set up a Firewall and VPN connection based on your needs.
As a Wi-Fi Mesh Primary Router
AWR5805 is designed to act as a mesh router or as a mesh node, and the configuration of one or both radios to work in mesh mode takes barely any time. No more fussing with topology changes or complicated wiring!
With Wi-Fi mesh, all nodes can communicate with each other and the transmission paths are dynamically adjusted if a change in signal strength or
topology is detected. So, even if a device is temporarily unaccessible due to interference or position, the network will still work perfectly. Mesh functionality can be combined with all other features of AWR5805.
DHCP Client/Static IP/PPPoE
|Connection||Telnet, SSH, TFTP/SFTP, Http, Https, SNMP|
|Other Protocols||NTP, DNS, 802.1Q VLAN, QoS, VRRP, MQTT|
|Security||Firewall||Access control list (ACL)
Attack Prevention (Inserted after Port forwarding)
|VPN||IPSEC, OPEN-VPN, LT2P, PPTP|
|Schedule operation||Schedule control of application|
|WLAN||Wi-Fi Connection||AP (802.11 a/b/g/n/ac), Mesh|
|Wi-Fi Security||OWE/WPA-PSK/WPA2-PSK/WPA3-PSK (SAE)|
|Management||System Configuration||WEB, Telnet, SSH|
|Firmware upgrade||WEB, TFTP|
|System Log||Log data to Local memory, remote logger, local flash|
|Diagnostics||Ping, Traceroute, Nslookup|
|Remote Management||ATOP OKRA remote management system|
|Statistics||Memory, Mobile, WAN, Wireless, LAN|
|Operating Temperature||-40°C to +75°C (-22°F to +158°F)|
|Storage Temperature||-40°C to +85°C (-40°F to +185°F)|
|Ambient Relative Humidity||5% to 95% RH, (non-condensing|
|Dimension L x W x H (mm)||145 x 120 x 46|
|Installation||DIN-Rail or Wall-Mount (optional kit)|
|Ingress Protection Rating||IP30 protection|
|Voltage Input||DC Power : 12 to 48V|
|Connector||3-pin Terminal block|
|Reverse Polarity Protection||Yes|
|PoE||PoE PD, 802.3at, Mode A|
|Wi-Fi||802.11ac wave 2(5GHz), 802.11a/b/g/n(2.4GHz/5GHz)
MU-MIMO 2x2 (2 streams)
Wi-Fi Mesh ready
|Ethernet ports||Standard||IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X)
IEEE 802.3ab for 1000BaseT(X)
|Ethernet ports||Ports||5x 10/100/1000 BASE-TX RJ-45
1 x WAN
4 x LAN
|Wi-Fi||2x SMA(M) antennas|
|External IO Interfaces|
|Default/Reset Button||1 key|
|SD Slot||1x micro-SD slot|
|LED Indicators||PWR, 2.4GHz Wi-Fi, 5.0 GHz Wi-Fi, LAN, WAN|
|CPU||ARM Cortex A7, Quad-Core|
|Watchdog||Hardware WD Reset: Yes|
|Others||RoHS, including 2015 amendment
Conflict Mineral Free
|IEC 61000-4-2||ESD||Contact Discharge|
|IEC 61000-4-3||RS||Enclosure Port||10 (V/m) , 80-1000MHz|
3 (V/m), 1.4-2.0GHz
10 (V/m), 2.0~2.7GHz
|IEC 61000-4-4||EFT||DC Power Port|
|±[email protected] 5.0kHz|
±1.0KV @ 5.0kHz
|IEC 61000-4-5||Surge||DC Power Port|
|IEC 61000-4-6||CS||DC Power Port|
|10V, 150KHz to 80MHz, 80%AM|
10V, 150KHz to 80MHz, 80%AM
|IEC 61000-4-8||PFMF||Enclosure||30A/m (r.m.s), 50Hz or 60Hz||4|
|Safety||UL/IEC 62368-1, IEC60950-1, EN62368-1|
|EMC||EN55032, EN61000-6-4, EN55024, EN61000-6-2, FCC Part 15B, FCC Part 18|
|Wi-Fi||EN300328 for WIFI b/g/n 2.4G, EN301893 for WIFI a/n/ac 5G, EN62311 MPE Report, Part
15C for 2.4G b/g/n, Part 15E for 5G B1/B4 a/n/ac
|MODEL NAME||PART NUMBER||DESCRIPTION|
|AD1048-24FS||50500481240001G||DIN-Rail Power Supply
Input: 100-240VAC / 120-370VDC; Output: [email protected]
Input: 100-240VAC; Output: [email protected]; US plug
|AWR5805||1x WAN, 4x LAN||802.11/a/b/g/n/ac||-||-||-||-|
|AWR5805P||1x WAN, 4x LAN||802.11/a/b/g/n/ac||-||-||Yes||-|