SE5901B Series

3G/4G LTE Cellular to Ethernet and Serial Secure Industrial Gateway/ Router

  • Extensive 3G and LTE Band Support
    - EU: 2100/1800/850/2600/900/800MHz (B1/B3/B5/B7/B8/B20)
    - US: 1900/AWS/850/700/700/1900MHz (B2/B4/B5/B13/B17/B25)
  • VPN over IPsec, OpenVPN or PPTP, data-rate up to 37.9Mbps*
  • Wide temperature, industrial grade platform
  • 1 x 10/100/1000Mbps Ethernet port
  • 1-port RS-232/485, baud rate up to 921.6 Kbps
  • Integrated Firewall, DMZ, Port Forwarding, DDNS, ICMP Ping
  • TCP Server/Client, UDP, Virtual COM supported
  • 2 Digital Inputs/ 2 Digital outputs in I/O version
  • Additional embedded power-bank for fault-relay capability (B version)
  • DNV-GL Marine Application, compliant with DNV.GL
SE5901B Series
SE5901B Series
SE5901B Series
SE5901B Series
SE5901B Series
SE5901B Series
SE5901B Series
SE5901B Series
SE5901B Series
SE5901B Series
SE5901B Series
SE5901B Series

Providing connectivity for the Internet of Things
SE5901B, ATOP’s Industrial Serial to Ethernet and Cellular Gateway/Router is a high-performance, cost effective gateway for serial signal communications; allowing almost any serial device to be connected to Ethernet network and providing connectivity to the world and at the same time protecting your network from intrusions. Its powerful CPU provides up to 37.9Mbps* software-assisted AES encryption for protecting your data flow through the Internet with a secure IPsec VPN tunnel.

Advanced features available
Flexible configuration options enable this unit to be setup over Ethernet by Telnet, Web Browser, or our Windows Utility. ATOP Virtual COM software provides a virtual environment for applications when accessing SE5901B through TCP. A dedicated I/O version provides 2 Digital Inputs and 2 Digital Outputs, GPS version provides Global positioning system geolocation and, specifically for the Internet of Things, a “B” version provides additional 15 seconds power during a power failure, allowing the device to relay back to the host the failure. This is Maintenance 4.0.

Rugged and flexible for advanced developments
SE5901B embeds high EMC protection, wide temperature operation, programming and installation flexibility in one device. SDK versions allow you to make use of the powerful hardware and develop your own applications on top of ATOP’s reliable APIs and with plenty of coding examples in ATOP’s SDK. SDK versions are available upon request. Please contact ATOP’s representative for additional information.

* test carried out with one VPN-IPsec Tunnel, Peer-to-Peer mode, Ethernet cable. Performance can change based on the Cellular Network.

Environmental Limits
Operating Temperature-40°C~70°C (-40°F~158°F)
Storage Temperature-40°C~85°C (-40°F~185°F)
Ambient Relative Humidity5%~95%, 55°C (Non-condensing)
Physical CharacteristicsValue
HousingIP30 protection, SPCC metal housing
Dimension (W x H x D)32mm x 122mm x 92mm
InstallationDIN-Rail , Wall mount (optional kit)
Reset ButtonYes
Input Voltage9 - 48 VDC
Input Current (@ 9VDC)0.6 A @ 12 VDC
Power Consumption0.6A @ 12VDC (7.2 W Max)
Connector3-Pin 5.08mm Lockable Terminal Block
Power RedundancyUSB DC 5V Power Input
Reverse Polarity ProtectionYes
Serial Server-relatedVirtualCOM (Serial/IP), Virtual Server (port Forwarding)
SecurityIPsec, PPTP or OpenVPN VPN tunneling. Max VPN throughput 37.9Mbps *;
SMTP/TLS, Firewall, DMZ
NetworkARP, IPv4, DHCP Client, ICMP, TCP, UDP, HTTP, RFC2217,TELNET, NTP Client,
NAT, Port Forwarding, ICMP Ping, DDNS
ManagementWeb, ATOP Device Management Utility, SNMPv1/v2c/v3, SMS
ConfigurationEmbedded Web-Server (Web UI), TELNET, Atop Device Management Utility
Other Interfaces
USB Ports2
USB Speed1 x USB 2.0 High Speed OTG; 1x USB power only
USB ConnectorUSB A Type
Digital Inputs (DI)2 x channels photo coupler isolated digital input
Digital Outputs (DO)2 x digital relay outputs. N.O.( [email protected])
GNSS Interfaces
Supported GNSSGPS, Glonass, Beidou
Connector1x SMA
Serial Interface
Connector14-Pin 5.08mm Terminal Block (integrated with DI/DOs) or D-Sub9 connector
Mode1 port RS-232/485 (2-wire) software selectable
Baud Rate1,200~921,600 bps
ParityNone, Odd, Even
Data Bits7, 8 software selectable
Stop Bits1, 2 software selectable
Network Interface
SpeedIEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X)
IEEE 802.3ab for 1000BaseT(X)
Connector ports1x 10/100/1000BASE-TX RJ-45
Wireless Interface    
Wireless ModuleEU version: Quectel EC25-E
US version: Quectel EC20-A
Antennas/ SIM card1 (3G) or 2 (4G) - Included. Internal SIM card slot (x1)
Band OptionsVersionBandBands
EUFDD LTE2100/1800/850/2600/900/800MHz
TDD LTE2600/2300/2500MHz (B38/B40/B41)
WCDMA2100/850/900MHz (B1/B5/B8)
USFDD LTE1900/1700/850/700/700bMHz
UMTS1900/1700/850MHz (B2/B4/B5)
Data RateLTE-FDDVersionBandDownlink SpeedUplink Speed
EULTE-FDD150 Mbps50 Mbps
LTE-TDD130 Mbps35 Mbps
DC-HSPA+42 Mbps5.76 Mbps
UMTS384 Kbps384 Kbps
TD-SCDMA4.2 Mbps2.2 Mbps
EDGE236.8 Kbps236.8 Kbps
GPRS85.6 Kbps85.6 Kbps
USLTE-FDD100 Mbps50 Mbps
LTE-TDD61 Mbps18 Mbps
DC-HSPA+42 Mbps5.76 Mbps
UMTS384 Kbps384 Kbps
TD-SCDMA4.2 Mbps2.2 Mbps
EDGE236.8 Kbps236.8 Kbps
GPRS85.6 Kbps85.6 Kbps
ShockMIL-STD-810G Method 516.7
DropMIL-STD-810G Method 516.7
VibrationMIL-STD-810G Method 514.7
Warranty5 Years
MTBF20.88 years according to MIL-HDBK-217F (Model average)
IEC 61000-4-2ESDContact Discharge
Air Discharge
IEC 61000-4-3RSEnclosure Port10(V/m), 80-1000MHz3
IEC 61000-4-4EFTAC Power Port
DC Power Port
Signal Port
IEC 61000-4-5SurgeDC Power Port
DC Power Port
Signal Port
Line-to Line±1.0KV
Line-to Earth±2.0KV
Line-to Earth±2.0KV
IEC 61000-4-6CS0.15-80MHz10V rms3
IEC 61000-4-8PFMF(Enclosure)AC 50Hz 10A/m3
IEC 61000-4-11DIPAC Power Port>95%,Reduction,0.5period
30%, Reduction,25 period
>95%,Reduction,250 period
SafetyEN 60950-1:2006, UL60950-1, IEC60950-1
EMC/RadioFCC Part 15, Subpart B, Class A
EN301489-19, EN301489-52, EN301908-1, EN303413, EN 55024, EN 55032, EN61000-6-4,
EN 61000-3-2, EN 61000-3-3, EN61000-6-2
RoHS 2Yes
UN315-1212(US-Y) LV650500151120003GY-Type (5.08 mm) adaptor, 100-240VAC input, 1.25A @ 12VDC output, US plug
UNE315-1212(EU-Y)LV650500151120013GY-Type (5.08 mm) adaptor, 100-240VAC input, 1.25A @ 12VDC output, EU plug
ADP-DB9(F)-TB559906231GFemale DB9 to Female 3.81mm TB5 Converter
WMK-315-Black70100000000050GBlack Aluminum Wall Mount Kit
SE5901B-D3G-US1P1SE5901B3G02G3G (US)1 (DB9)--
SE5901B-IO-D3G-US1P1SE5901BIO02G3G (US)1 (TB)2/2-
SE5901B-IO-D3G-GPS-US1P1SE5901BIO03G3G (US)1 (TB)2/2GPS
SE5901B-4G-US1P1SE5901B4G03G4G (US)1 (DB9)--
SE5901B-IO-4G-US1P1SE5901BIO04G4G (US)1 (TB)2/2-
SE5901B-IO-4G-GPS-US1P1SE5901BIO06G4G (US)1 (TB)2/2GPS
SE5901B-4G-B-US1P1SE5901B4G04G4G (US)1 (DB9)-Battery
SE5901B-IO-4G-B-US1P1SE5901BIO05G4G (US)1 (TB)2/2Battery
SE5901B-IO-4G-GPS-B-US1P1SE5901BIO07G4G (US)1 (TB)2/2GPS - Battery
SE5901B-D3G-EU1P1SE5901B3G12G3G (EU)1 (DB9)--
SE5901B-IO-D3G-EU1P1SE5901BIO12G3G (EU)1 (TB)2/2-
SE5901B-IO-D3G-GPS-EU1P1SE5901BIO13G3G (EU)1 (TB)2/2GPS
SE5901B-4G-EU1P1SE5901B4G13G4G (EU)1 (DB9)--
SE5901B-IO-4G-EU1P1SE5901BIO14G4G (EU)1 (TB)2/2-
SE5901B-IO-4G-GPS-EU1P1SE5901BIO16G4G (EU)1 (TB)2/2GPS
SE5901B-4G-B-EU1P1SE5901B4G14G4G (EU)1 (DB9)-Battery
SE5901B-IO-4G-B-EU1P1SE5901BIO15G4G (EU)1 (TB)2/2Battery
SE5901B-IO-4G-GPS-B-EU1P1SE5901BIO17G4G (EU)1 (TB)2/2GPS - Battery
SE5901B-IO-4G-GPS-B-US (for Marine)1P1SE5901BIO0TG4G (US)1 (TB)2/2GPS - Battery
SE5901B-4G-B-US (for Marine)1P1SE5901B4G0CG4G (US)1 (DB9)-Battery