EHG6410 Series

Industrial 10-port unmanaged 24V PoE Gigabit Switch with voltage booster (12~57V)

  • 8 x 10/100/1000 BASE-T(X) ports with 2 x 100/1000 SFP slots or
  • 8 x 10/100/1000 BASE-T(X) ports with 2 x 1000 BASE-X SFP slots
  • Optional PoE ports with booster function (12~57 VDC)
  • IP30 aluminum with DIN-Rail / Wall mount (optional)
  • Operating range of -40°C to +75°C
  • CB/IEC60950-1&62368-1 and UL/cUL62368-1
EHG6410 Series
EHG6410 Series
EHG6410 Series

The EHG6410 model features 8 x 10/100/1000BASE-T(X), which supports a port configuration mix of up to 8 x non-PoE ports and either 4 x or 8 x PoE ports, as well as either an additional 2 x 100 BASE-FX / 1000 BASE-X ports with SFP slots, totaling 10 x ports altogether.
Full configuration options are available in the ordering information.


Industrial Grade Design
With its modern, slim, and flat design to minimize surface area usage, this switch series is ideal for demanding industrial applications that require compact solutions to deliver network performance.
Supporting a wide operating temperature range of -40°C to 75°C and being compliant with essential sections of UL/CB(IEC) 62368-1, and MIL-STD-810F, this switch series is a powerful compact device that can perform in various environments under a variety of conditions, such as power input voltage, shock, drop and vibration.


PoE Voltage Booster Option
As part of its compact design, this switch series is available with an optional voltage booster for PoE end devices. Available on the 24V models, the PoE Voltage Boost raises the input voltage of power inputs from as low as 12V to provide Power over Ethernet to end devices. This removes the need for additional, separate power inputs, which can often be costly and space-consuming.

Environmental Limits
Operating TemperatureNon-PoE models:
-40°C to +75°C (-40°F to +167°F)

PoE models:
12~23VDC, 60W, -40°C to +70°C (-40°F to +158°F)
24~57VDC, 120W,-40°C to +70°C (-40°F to +158°F)
Storage Temperature-40°C to +85°C (-40°F to +185°F)
Ambient Relative Humidity5% to 95%, 55°C (Non-condensing)
Physical Characteristics
HousingIP30 metal housing
Dimension (W x H x D)54 x 145 x 113 mm
InstallationDIN-Rail , Wall mount (optional kit)
IndicatorsP1, P2, Fault, SFP1-2, PoE LED
PoE Voltage BoosterYes (Max support 120W), by optional model
Input Voltage12~57 VDC
Input CurrentPoE booster (-24V): 12~23VDC, max 7A
24~57VDC, max 6A
Max. Power Consumption12~23VDC, max total 60W
24~57VDC, max total 120W
*Note: PoE models support max 60 Watts at 12~23VDC and max 120 Watts at
24~57VDC for the total PD consumption.
Total PD consumption should not be over loaded.
ComplianceIEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X) and 100BASE-FX
IEEE 802.3ab for 1000BaseT
IEEE 802.3x for 1000BaseX
IEEE 802.3x for Flow Control, back pressure flow control
IEEE 802.3af/at for Power-over-Ethernet
IEEE 802.3az Energy Efficient Ethernet
IEEE 802.1Q for VLAN Tagging
IEEE 802.1p for CoS
Flow ControlBack pressure and pause frame-based flow control schemes
RJ 45 Transmission Rate10/100/1000 Mbps
SFP Transmission Rate100/1000 Mbps (by Dip-switch) – EHG6410-D only
1000 Mbps - EHG6410 (without -D extension only)
Network Interface
Processing SchemeStore and Forward
MAC Address Table16 K
Packet Buffer Size2MBits
Jumbo Frame10K Bytes
ShockMIL-STD-810F Method 516.5
DropMIL-STD-810F Method 516.5
VibrationMIL-STD-810F Method 514.5 C-1 & C-2
MTBF20.35 years according to MIL-HDBK-217F (worst case: 15.74 years)
Warranty5 years
IEC 61000-4-2ESDContact Discharge
Air Discharge
IEC 61000-4-3RS80-1000MHz
IEC 61000-4-4EFTDC Power Port
Signal Port
IEC 61000-4-5SurgeDC Power Port
DC Power Port
Signal Port
Line-to Line±1.0KV
Line-to Earth±2.0KV
Line-to Earth±2.0KV
IEC 61000-4-6CS0.15-80MHz10 V rms3
IEC 61000-4-8PFMFEnclosure30 A/m
1 min. all 3 spatial axes
Regulatory Approvals
SafetyUL62368-1:2014(2nd Ed.),CB/IEC60950-1:2005(2nd Ed.),CB/IEC62368-1:2014(2nd Ed.)
EMCFCC Part 15, Subpart B, Class A
EN 55032:2015 +AC:2016 Class A
EN 61000-3-2: 2014, Class A, EN 61000-3-3: 2013, EN 61000-6-4: 2007+ A1: 2001
EN 55024: 2010+ A1:2015, EN 61000-6-2:2005+ AC : 2005
TypeModel namePart NumberDescription
Wall MountWall Mount set70100000000052GAluminum wall mount kit
Power SupplySDR-75-2450500752240001GDIN RAIL;AC 88~264V to 24VDC 3.2A;75W
Power SupplySDR-240-4850502401480001GDIN RAIL;AC 88~264V to 48V~55VDC 5A; 240W
Power SupplySDR-480-4850504801480001GDIN RAIL;AC 88~264V to 48V~55VDC 5A; 240W
SFP TransceiverAXFD-1314-0523522AXFD1314001GSFP Transceiver; 155Mbps, Multi-mode; 1310nm; 2km;
-40°C to +85°C, DDMI
SFP TransceiverAXFD-1314-0553522AXFD1314011GSFP Transceiver; 155Mbps, Single-mode; 1310nm; 30km;
-40°C to +85°C, DDMI
SFP TransceiverAXGD-5854-0513522AXGD5854001GSFP Transceiver, 1250Mbps, 850nm, Multi-mode, 550m,
3.3V, -40°C to +85°C, DDMI
SFP TransceiverAXGD-1354-0523522AXGD1354001GSFP Transceiver, 1250Mbps, 1310nm, Multi-mode, 2km,
3.3V, -40°C to +85°C, DDMI
SFP TransceiverAXGD-1354-0533522AXGD1354011GSFP Transceiver, 1250Mbps, 1310nm, Single-mode, 10km,
3.3V, -40°C to +85°C, DDMI
SFP TransceiverAXGD-3354-0593522AXGD3354001GSFP Transceiver, 1250Mbps, 1310nm, Single-mode, 40km,
3.3V, -40°C to +85°C, DDMI
Model name Part Number Description
EHG6410-2SFP1P1EHG64100001G8*1G RJ;2*1G SFP
EHG6410-4PoE-2SFP-24V1P1EHG64100002G4*1G RJ;4*1G PoE Booster;2*1G SFP
EHG6410-8PoE-2SFP-24V1P1EHG64100003G8*1G RJ/PoE Booster;2*1G SFP
EHG6410-2SFP-D1P1EHG64100004G8*1G RJ;2*100/1G SFP
EHG6410-4PoE-2SFP-D-24V1P1EHG64100005G4*1G RJ;4*1G PoE Booster;2*100/1G SFP
EHG6410-8PoE-2SFP-D-24V1P1EHG64100006G8*1G RJ/PoE Booster;2*100/1G SFP