MB5202

Compact 2-Port Industrial Modbus TCP/RTU/ASCII Gateway, Field-Mount

Flexible Connectivity

  • Software-selectable RS-232/485/422
  • RJ45 Fast Ethernet port or 100Mbps SFP Slot
  • Modbus TCP/RTU/ASCII
  • Supports TCP server/client, UDP

Comprehensive Management

  • Configuration via Web, Telnet and Windows Utility
  • Integrated SNMPv1/v2c/v3, HTTPS, Telnet and SSH configuration
  • Upgradable firmware via Ethernet from a remote-PC
  • Virtual COM and Tunneling modes

Reliable & Redundant Design

  • Rugged metal casing; industrial EMC protection
  • Redundant dual DC power inputs for non-stop operation
MB5202
MB5202
MB5202

Diverse Hardware Infrastructure
The MB5202 Modbus Gateway supports the four most commonly used communication standards, RS-232, RS-485, RS-422, and Ethernet. It comes with a user-friendly configuration utility to allow quick hardware interface selection, so you can easily connect to your existing communication infrastructure. And with industrial EMC protection plus a wide operation temperature range, MB5202 is ready for every mission.

Switching between Modbus Protocols
MB5202 supports the Modbus protocols and is capable of conversion between Modbus TCP, Modbus RTU, and Modbus ASCII for all supported hardware interfaces.

Modbus ID Routing
Besides various types of hardware communication interfaces and Modbus protocol conversion, MB5202 also supports Modbus ID routing. Therefore, it can integrate your existing and complex Modbus hardware configuration into a simple network for easy management.

Software
ProtocolsTCP, IPv4, UDP, DHCP Client, HTTP, HTTPS, Telnet, ARP, SNMPv1,v2c,v3
ConfigurationAtop Management Utility, Web UI, Telnet, CLI
VirtualCOMWindows/Linux redirection software
ModbusTCP/RTU/ASCII
TCP ClientSingle destination or VirtualCOM
TCP Server4 Connections; VirtualCOM or reverse Telnet
UDPUp to 4 Ranges IP
Environmental Limits
Operating Temperature-20°C to +70°C (-4°F to +58°F)
Storage Temperature-40°C to +85°C (-40°F to +185°F)
Ambient Relative Humidity5 to 95% RH (non-condensing)
Physical CharacteristicsValue
Dimension (W x H x D)75 mm x 85 mm x 28 mm (without wall-mount part)
MB5202-TB/MB5202-Sis: 74.5 x 108.2 x27.5mm (with wall-mount part)
MB5202-DB: 80.3 x 108.2 x27.5mm (with wall-mount part and DB9 connector)
MB5202-SFP-TB: 76.6 x 108.2 x 27.5mm (with wall-mount and SFP)
MB5202-SFP-DB: 81.4 x 108.2 x 27.5mm (with wall-mount SFP and DB9)
Weight200g
InstallationWall-Mount or DIN-Rail (optional kit)
Reset ButtonYes
PowerValue
Connector3-Pin 5.08mm Lockable Terminal Block and DC Jack for redundancy
Input Voltage3-Pin 5.08mm Terminal Block: 9-30VDC; DC Lockable Jack 5VDC
Power Consumption<9W
Power RedundancyYes
Reverse Polarity ProtectionYes
Serial Interface
Connector9-Pin D-Sub9 connector(Male, -DB version) or 5-Pin Terminal block (-TB version)
Ports2
Mode1x RS-232(Full-function DB9)/RS-485(2 and 4 wire)/RS-422, software selectable
1x RS-232/RS-485(2 and 4 wire)/RS-422, software selectable
Baud Rate1200~230,400 bps
ParityNone, Odd, Even, Space, Mark
Data Bits7, 8
Stop Bits1, 2
Flow ControlNone, Xon/Xoff, RTS/CTS (RS-232 only)
Network Interface
Ethernet Port1x 10/100BASE-T(X) RJ-45 or 1x100BASE-FX SFP Slot
ComplianceIEEE 802.3 for 10BASE-T
IEEE 802.3u for 100BASE-T(X) and 100BASE-FX
CertificationStandard
ShockMIL-STD-810F Method 516.5
DropMIL-STD-810F Method 516.5
VibrationMIL-STD-810F Method 514.5 C-1 & C-2
Warranty5 Years
MTBF61.87
StandardItemTest pointValueLevel
IEC 61000-4-2ESDContact Discharge
Air Discharge
±4KV
±8KV
2
3
IEC 61000-4-3RS80-1000MHz10(V/m)3
IEC 61000-4-4EFTAC Power Port
DC Power Port
Signal Port
±1.0KV
±0.5KV
±0.5KV
3
3
3
IEC 61000-4-5SurgeAC Power Port
AC Power Port
Signal Port
Line-to Line±1.0KV
Line-to Earth±2.0KV
Line-to Earth±1.0KV
2
2
2
IEC 61000-4-6CS0.15-80MHz10 Vrms3
IEC 61000-4-8PFMFEnclosure30A/m3
IEC 61000-4-11DIPAC Power Port--
CertificationStandard
SafetyEN62368-1
EMCFCC Part 15, Subpart B, Class A
EN 55032, EN61000-6-4
EN 61000-3-2
EN 61000-3-3
EN 55024, EN61000-6-2
RoHSYes
MODEL NAME PART NUMBERDESCRIPTION
UN315-1212 (US-Y)50500151120003GY-Type power adapter, 100~240VAC input, 1.25A @12VDC output, US plug
UNE315-1212 (EU-Y)50500151120013GY-Type power adapter, 100~240VAC input, 1.25A @12VDC output, EU plug
2AAU005B-EU50500051500014GDC jack (5.0/2.1/9.5 mm) with Lock power adapter, 100~240VAC input, 1.0A @ 5 VDC output, EU plug, LV VI
2AAU005B-US50500051500004GDC jack (5.0/2.1/9.5 mm) with Lock power adapter, 100~240VAC input, 1.0A @ 5 VDC output, US plug, LV VI
ADP-DB9(F)-TB559906231GFemale DB9 to Female 3.81mm TB5 Converter
ADP-DB9(M)-DB9(F)59901411GSE_MB52XX DB9 Pin assignment to SE_MB50XX DB9 Pin assignment
DK-2530200000000022GPlastic DIN Rail Kit
AXFD-1314-0523522AXFD1314001GSFP Transceiver: 155Mbps, Multi-mode, 1310nm, 2km, -40 to +85°C,
DDMI
AXFD-1314-0553522AXFD1314011GSFP Transceiver: 155Mbps, Single-mode, 1310nm, 30km, -40 to +85°C,
DDMI
MODEL NAME PART NUMBERDescription
MB5202-DB1P1MB520200001G2-Port Entry-Level Modbus Gateway, RS-232/422/485, DB9(M)
MB5202-TB1P1MB520200002G2-Port Entry-Level Modbus Gateway, RS-232/422/485, Terminal block
MB5202-SiS1P1MB520200003G2-Port Entry-Level Modbus Gateway, RS-232/422/485, 2kV Isolation,
Terminal block
MB5202-SFP-DB1P1MB520200004G2-Port Entry-Level Modbus Gateway, RS-232/422/485, DB9(M)
MB5202-SFP-TB1P1MB520200005G2-Port Entry-Level Modbus Gateway, RS-232/422/485, Terminal block